High Pressure Cleaning

Overview

It is a cleansing technique performed through a pressure pump installed in tankers.

Technically it is the injection pressure of the water contained in the tanker, through special hoses that connect the different types of nozzles, depending on the service characteristics.

Types of Services

Pipe unblocking

Pipe unblocking by high pressure

Jam or choking of the pipes is usually caused by the accumulation in the network of water-insoluble waste: paper, tissues, sediments, tree roots nearby, solidified detergent, etc.. Or, by the misuse of the network: and effluent polish, rags or other objects.

What unblocking a pipe consists of? Depending on the area of ​​the home or facility to which affects our engineers introduced the pressure elements (pressure hose + nozzle of diameter and type of pipe) from a register or casket. By pumping water attempting to reach the blocked area undoing the waste contained and making back to the starting point, where the team aspire Absorption High Vacuum and retire to a waste water treatment plant.

Pipe unblocking by high pressure

Drain Cleaning, Collectors

Pipes, manholes and sanitation water collectors or storm drains due to normal use, accumulate debris such as sand, organic detergent solidify that adheres to the walls of the tube, roots, etc. , which over time cause deficiencies in the drainage of water, even to cause clogging of the tube (choking) and subsequent flooding. So it is advisable to prevent this end by making proper use of the network (avoiding the landfill of waste water insoluble, as wipes, pads, paper, etc.) And performing preventive periodic cleaning.

What the cleaning of drains consists of? From the different wells or manholes of the network, our technicians introduce the pressure elements (pressure hoses + type nozzle according pipe diameter) through the water discharge hose moves through the pipe section undoing the waste contents and making this move ad return to the manholes or wells, where the team use a High absorption vacuum and then return to a sewage treatment plant or landfill.

Cleaning Collectors 800-1500 meters in diameter or storm waters, municipal waste water or private: We use special nozzles that are very effective:

  • Pineapple nozzle 8 outputs of 2.2 m
  • Skipjack pendular nozzle / Cobra for extracting large amounts of sand (by weight of 29 kg and their jets toward the bottom of the collector).
Dirty pipe / Clean pipe

Clean surfaces, road, asphalt, etc.

Using high pressure systems installed on tankers, to clean surfaces of certain facilities (roads, walls of different materials, tennis courts, etc..) Through its unique flushing and discharge of water (avoiding the use of chemicals)

We use wash down nozzles or high-pressure guns, our technicians adjust the water pressure depending on how dirty and the surface resistance.

Clean surfaces - road Cleaning of vertical surfaces

Cleaning and disinfecting wells and drinking water reservoirs

Cleaning and disinfecting wells and drinking water reservoirs

The cwells and water tanks installed in private homes, communities, hotels, venues or any installation, over time, cause the accumulation of sediments and / or lime are suspended in the water that enters. These are adhering to the inner surface of the facility, forming what is known as biofilm, which are develope a number of microorganisms, which in certain cases (for long periods without cleaning, or downtime facilities with stagnant water, entry of insects or rodents, contaminated water leaks, etc.) can affect people after consumption or use, in the form of certain diseases.

Several years ago there was a deep social concern in our country arising from outbreaks of the disease known as "Legionnaires' disease". Following this, we studied and developed series of legal regulations to prevent the growth of bacteria that generates (legionella) in the facilities that are considered hazardous (including those mentioned are considered cisterns and water tanks).

DFor several years our company has adopted protocols for cleaning and disinfection in accordance with guidelines established by such legal regulations. We deliver after cleaning and disinfection of the premises the corresponding Certificate of Sanitation. Also, note that our system minimizes downtime of facilities, ie, the time they have to stay without water.

It is not necessary to hire both services. In cases where the customer consider it not necessary, or, he deals with the disinfection process, performed only the wells or tank cleaning.

Cleaning and disinfecting wells and drinking water reservoirs

Sanitation of Drinking Water Supply pipes

To ensure that water consumption comes at optimal conditions, It is required prior to the implementation of the drinking water supply lines, cleaning and disinfection in accordance with legal requirements. These operations are also necessary when the network has some sort of repair, pollution, etc.

This will remove the possible remains of sediments accumulated during Repair works, its execution, and eliminate potential harmful microorganisms.

Cleaning and disinfection of new supply networks is usually done once they have passed the pressure and just before their operation (considering that the legal validity period from the disinfection must be greater than 30 days). The process we do meets the guidelines of the legal regulations (Real Decreto 140/2003 laying down the health criteria for water quality for human consumption) and the recommendations of the SINAC (National drinking water Information System), giving the corresponding Certificate of Disinfection.

Technical Information

Pressure pumps model, Woma, P-45 1800 1502 rpm, flow rate 215 l / min Working pressure 250 to 750 kg / cm 2

Types of nozzles:

  • Pineapple Nozzles 8 outputs: cleaning collectors.
  • Nozzles Teja: for sand mining.
  • Nozzles pendulum Skipjack / Cobra: cleaning large collectors.
  • Nozzles root Cutters.
  • Pressure guns: surface cleaning.
  • Cleaning nozzles for piping.
Types of nozzles